#BENDIX ABS 430002 SERIAL#
#BENDIX ABS 430002 CODE#

An assembly model designation is assigned when the EC-30 в„ў controller is mounted on an AR (antilock relay) valve or an ATR (antilock/traction relay) valve. The controller valve assembly is then mounted in place of the standard service brake relay valve on the vehicle. The EC-30 в„ў controller can be assembled on one of four different valve models. The EC-30 в„ў controller can be bracket mounted to the vehicle cab or chassis as a stand alone ECU. The ABS warning lamp for EC-17 в„ў and EC-16 в„ў controllers, at power-up without faults, will illuminate for approximately 8 seconds and flash twice before turning off.Д¬HART 1 - ECU DIFFERENCES (EC-30 в„ў, EC-17 в„ў, EC-16 в„ў CONTROLLERS)

The EC-30 в„ў controllerABS warning lamp, at power-up without faults, will illuminate for 2.5 seconds and then turn off. The EC-30 в„ў controllerABS warning lamp power-up sequence has been simplified compared to the EC-17 в„ў and EC-16 в„ў controllers. The EC-16 в„ў controller utilizes a totally metal enclosure. However, the EC-30 в„ў controller utilizes plastic mounting inserts to reduce mounting bolt corrosion, where the EC-17 в„ў controller utilizes metal mounting inserts. The EC-30 в„ў controller has a black plastic enclosure similar to the EC-17 в„ў controller. The EC-30 в„ў controller has been designed to replace the EC-17 в„ў and the EC-16 в„ў controllers as the standard Bendix ABS controller for OEM and aftermarket installations. The EC-30 в„ў controller utilizes a 30-pin and an 18-pin wire harness to interface with ABS, ATC and vehicle system components.Д®C-30 в„ў Controller Comparison to EC-16 в„ў and EC-17 в„ў Controllers The design of the EC-30 в„ў controller electronics is robust against radio, electromagnetic and environmental interference.ДЄ patented LED (light emitting diode) diagnostic display and magnetic reset switch are incorporated in the housing for simple, self-contained diagnostics. The EC-30 в„ў controller electronics are contained in a nonmetallic housing and are environmentally protected by a hard epoxy potting compound.

#BENDIX ABS 430002 SERIAL#

Serial communication to engine control module (interfaces with throttle input and engine torque) ATC modulator - Integral to the ATR (antilock/traction relay) valve assembly The EC-30 в„ў controller ATC function utilizes the following additional components:

#BENDIX ABS 430002 CODE#

Blink code activation switch (optional)

Dash mounted trailer ABS warning lamp (towing vehicles manufactured after March 1, 2001) Dash mounted tractor ABS warning lamp (relay controlled) Electro-pneumatic ABS modulator valves (4) Wheel speed sensors (4 or 6, depending on configuration) The EC-30 в„ў controller ABS function utilizes the following components: ДЇIGURE 2 - EC-30 в„ў CONTROLLER WITH ATR VALVE Removing the EC-30 в„ў Controller Assembly.

Bendix abs 430002